Geliştiriciler için API Referansı

Başlarken

İsteklerin sistem tarafından işlenmesi için bir API anahtarı gereklidir. Bir kullanıcı kaydolduğunda, bu kullanıcı için otomatik olarak bir API anahtarı oluşturulur. API anahtarı her istekle birlikte gönderilmelidir (aşağıdaki tam örneğe bakn). API anahtarı gönderilmezse veya süresi dolmuşsa bir hata olacaktır. Kötüye kullanımı önlemek için lütfen API anahtarınızı gizli tuttuğunuzdan emin olun.

Kimlik Doğrulama

API sistemiyle kimlik doğrulaması yapmak için API anahtarınızı her istekle birlikte bir yetkilendirme belirteci olarak göndermeniz gerekir. Aşağıda örnek kodu görebilirsiniz.

curl --location --request POST 'https://netbrandly.com/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ 
$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
));

$response = curl_exec($curl);
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://netbrandly.com/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: ''
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Oran Sınırı

API'miz, kararlılığını en üst düzeye çıkarmak için isteklerdeki ani artışlara karşı koruma sağlayan bir hız sınırlayıcıya sahiptir. Hız snırlayıcımız şu anda 1 dakika başına 30 istekle sınrlandırılmıştır. Please note that the rate might change according to the subscribed plan.

Yanıtla birlikte birkaç başlık gönderilir ve bunlar, istekle ilgili çeşitli bilgileri belirlemek için incelenebilir.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
Yanıt İşleme

Tüm API yanıtı, varsayılan olarak JSON biçiminde döndürülür. Bunu kullanılabilir verilere dönüştürmek için dile göre uygun işlevin kullanılması gerekecektir. PHP'de, json_decode() ilevi, verileri bir nesneye (varsayılan) veya bir diziye (ikinci parametreyi true olarak ayarlayın) dönüştürmek için kullanılabilir. Hata anahtarının kontrol edilmesi bir hata olup olmadığı hakkında bilgi verdiği için çok önemlidir. Başlık kodunu da kontrol edebilirsiniz.

{
    "error": 1,
    "message": "An error occurred"
}

Account

Get Account
GET https://netbrandly.com/api/account

To get information on the account, you can send a request to this endpoint and it will return data on the account.

curl --location --request GET 'https://netbrandly.com/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "data": {
        "id": 1,
        "email": "[email protected]",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}
Update Account
PUT https://netbrandly.com/api/account/update

To update information on the account, you can send a request to this endpoint and it will update data on the account.

curl --location --request PUT 'https://netbrandly.com/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "[email protected]",
    "password": "newpassword"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "email": "[email protected]",
	    "password": "newpassword"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://netbrandly.com/api/account/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "email": "[email protected]",
    "password": "newpassword"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Account has been successfully updated."
}

Bağlantılar


CTA Yerleşimleri

List CTA Overlays
GET https://netbrandly.com/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

ParametreTanım
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://netbrandly.com/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/overlay?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Kampanyalar

List Campaigns
GET https://netbrandly.com/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

ParametreTanım
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://netbrandly.com/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/campaigns?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}
Kampanya Oluştur
POST https://netbrandly.com/api/campaign/add

A campaign can be added using this endpoint.

ParametreTanım
name (optional) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request POST 'https://netbrandly.com/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Campaign",
	    "slug": "new-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://netbrandly.com/api/campaign/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
POST https://netbrandly.com/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

curl --location --request POST 'https://netbrandly.com/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://netbrandly.com/api/campaign/:campaignid/assign/:linkid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Link successfully added to the campaign."
}
Kampanyayı Güncelle
PUT https://netbrandly.com/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParametreTanım
name (required) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request PUT 'https://netbrandly.com/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Twitter Campaign",
	    "slug": "twitter-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://netbrandly.com/api/campaign/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
Delete Campaign
DELETE https://netbrandly.com/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

curl --location --request DELETE 'https://netbrandly.com/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://netbrandly.com/api/campaign/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

Kanal Yönetimi

List Channels
GET https://netbrandly.com/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

ParametreTanım
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://netbrandly.com/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/channels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}
List Channel Items
GET https://netbrandly.com/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

ParametreTanım
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://netbrandly.com/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/channel/:id?limit=1&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/netbrandly.com\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/netbrandly.com\/mybio",
                "link": "https:\/\/netbrandly.com\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}
Kanal Oluştur
POST https://netbrandly.com/api/channel/add

A channel can be added using this endpoint.

ParametreTanım
name (required) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request POST 'https://netbrandly.com/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Channel",
	    "description": "my new channel",
	    "color": "#000000",
	    "starred": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://netbrandly.com/api/channel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}
Assign an Item to a Channel
POST https://netbrandly.com/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

ParametreTanım
:channelid (required) Channel ID
:type (required) links or bio or qr
:itemid (required) Item ID
curl --location --request POST 'https://netbrandly.com/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://netbrandly.com/api/channel/:channelid/assign/:type/:itemid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Item successfully added to the channel."
}
Update Channel
PUT https://netbrandly.com/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParametreTanım
name (optional) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request PUT 'https://netbrandly.com/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Acme Corp",
	    "description": "channel for items for Acme Corp",
	    "color": "#FFFFFF",
	    "starred": false
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://netbrandly.com/api/channel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Channel has been updated successfully."
}
Delete Channel
DELETE https://netbrandly.com/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

curl --location --request DELETE 'https://netbrandly.com/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://netbrandly.com/api/channel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

Markalı Alan Adları

List Branded Domains
GET https://netbrandly.com/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

ParametreTanım
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://netbrandly.com/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/domains?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}
Create a Branded Domain
POST https://netbrandly.com/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

ParametreTanım
domain (required) Branded domain including http or https
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request POST 'https://netbrandly.com/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "domain": "https:\/\/domain1.com",
	    "redirectroot": "https:\/\/rootdomain.com",
	    "redirect404": "https:\/\/rootdomain.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://netbrandly.com/api/domain/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "id": 1
}
Alan Adını Güncelle
PUT https://netbrandly.com/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParametreTanım
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request PUT 'https://netbrandly.com/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "redirectroot": "https:\/\/rootdomain-new.com",
	    "redirect404": "https:\/\/rootdomain-new.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://netbrandly.com/api/domain/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Domain has been updated successfully."
}
Delete Domain
DELETE https://netbrandly.com/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

curl --location --request DELETE 'https://netbrandly.com/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://netbrandly.com/api/domain/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

Pikseller

List Pixels
GET https://netbrandly.com/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

ParametreTanım
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://netbrandly.com/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/pixels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}
Create a Pixel
POST https://netbrandly.com/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

ParametreTanım
type (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok
name (required) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request POST 'https://netbrandly.com/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "gtmpixel",
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://netbrandly.com/api/pixel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "id": 1
}
Pixel'i Güncelle
PUT https://netbrandly.com/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParametreTanım
name (optional) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request PUT 'https://netbrandly.com/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://netbrandly.com/api/pixel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Pixel has been updated successfully."
}
Delete Pixel
DELETE https://netbrandly.com/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

curl --location --request DELETE 'https://netbrandly.com/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://netbrandly.com/api/pixel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

QR Kodlar

List QR codes
GET https://netbrandly.com/api/qr?limit=2&page=1

To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).

ParametreTanım
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://netbrandly.com/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/qr?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/netbrandly.com\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/netbrandly.com\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}
Get a single QR Code
GET https://netbrandly.com/api/qr/:id

To get details for a single QR code via the API, you can use this endpoint.

curl --location --request GET 'https://netbrandly.com/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/qr/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/netbrandly.com\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}
Create a QR Code
POST https://netbrandly.com/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParametreTanım
type (required) text | vcard | link | email | phone | sms | wifi
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request POST 'https://netbrandly.com/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://netbrandly.com/api/qr/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "id": 3,
    "link": "https:\/\/netbrandly.com\/qr\/a58f79"
}
Update QR Code
PUT https://netbrandly.com/api/qr/:id/update

To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParametreTanım
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request PUT 'https://netbrandly.com/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://netbrandly.com/api/qr/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "QR has been updated successfully."
}
Delete a QR Code
DELETE https://netbrandly.com/api/qr/:id/delete

To delete a QR code, you need to send a DELETE request.

curl --location --request DELETE 'https://netbrandly.com/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://netbrandly.com/api/qr/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

Özel Açılış Sayfası

List Custom Splash
GET https://netbrandly.com/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

ParametreTanım
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://netbrandly.com/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://netbrandly.com/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://netbrandly.com/api/splash?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Sunucu cevabı
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}